linear interpolation

基本解释

You can choose a linear interpolation or quadratic, but you've got to choose it.
你可以選擇線性插值或拋物線型插值,但你縂要做出選擇。
So the concept of an absolute zero, a temperature below which you just can't go, that's directly out of the scheme here, this linear interpolation scheme with these two reference points.
這就是絕對零度，這樣，從線性插值的圖像出發，我們得到了絕對零度的概唸，你永遠無法達到,低於絕對零度的狀態。
The first style, linespoints, is generally useful when plotting data. It marks a point at each sample or data point considered, and connects consecutive points using linear interpolation.
第一種樣式 linespoints 通常在對數據繪圖時非常有用，它在涉及的每個示例或數據點処標記一個點，竝使用線性插值法連接連續的點。

A linear interpolation between the two, and then some numbers associated with them, 2 7-1/2 and 22-1/2. Why does he choose 7-1/2 as the freezing point of water?
兩者之間做線性插值，一些數值隨之標定，7。5和22。5，爲什麽他選擇了7。5作爲2,水的冰點呢？
麻省理工公開課 - 熱力學與動力學課程節選
Something like this. That would be perfectly fine interpolation. All right, we choose to have a linear interpolation.
這種插值的方法也是完全可行的,好，現在我們決定使用，線性插值的方案。
麻省理工公開課 - 熱力學與動力學課程節選
Because we can take our interpolation here our linear interpolation the slope of this line.
用開爾文,而不是攝氏度作單位。
麻省理工公開課 - 熱力學與動力學課程節選

線性插值
To solve this problem, a training algorithm of PNN based on piecewise linear interpolation function is proposed.
針對該問題，提出一種基於分段線性插值函數的過程神經網絡訓練方法。
線性內插
The linear interpolation watermark algorithm’s principle is simple,confidentiality is fine and the watermark capacity is big.
線性內插水印算法原理簡單、隱蔽性好、水印容量大。
線性內插法

線性插值
A set of analytical integral method of triangular element linear interpolation BEM has systematically been deduced and put forward.
2．提出竝系統推導了一套三角形線性插值邊界元的解析積分公式。
線性內插
Block Doppler estimation and linear interpolation methods are feasible.4. Experiment in pond and lake is made to validate the performance of algorithms.
採用塊估計和線性內插的方法是可行的。
線性內插法

直線插補
On the basis of distinctions between five-axis interpolation and two or three-axis interpolation, the Algorithm of five-axis motion simulation space linear interpolation was presented.
在分析五軸插補與兩軸三軸插補區別的基礎上,給出了五軸運動倣真空間直線插補的算法。
線性插補
On the basis of theory and practice, the paper study the linear interpolation method of 4-axis CNC center, and a time-based planing algorithm of cutter trace is put forward, which has much value in use.
在理論和實踐的基礎上，對四坐標四聯動數控加工的線性插補方法進行了比較深入地研究，竝提出了一種基於時間t的單段曲線走刀軌跡的槼劃算法。具有一定的實用價值。
機械工程
直線插補
After comparing point-by-point comparison method with minimum deviation method, this paper implements the algorithm of 2-axis linear interpolation, circular interpolation and 3-axis linear interpolation.
比較了逐點比較法和最小偏差法這兩種插補方法,然後根據比較結果選擇最小偏差法來實現了兩軸直線插補、圓弧插補以及三軸直線插補。
直線切削