DSIF

常见例句

• The calculation formula of DSIF was proposed.
  在此基础上,构建了用于计算动态应力强度因子的近似表达式。
• The dynamic stress intensity factor (DSIF) at the terminating point is defined in terms of the singular stresses at the point.
  利用所得的奇性应力定义了裂纹和界面接触点处的动应力强度因子。
• The distributions of DSIF with time under different pavement temperature field are similar,and the maximum DSIF decreased with increasing temperature.
  不同温度下的最大动应力强度因子出现的时间基本相同,且最大动应力强度因子随温度的升高而减小;
• The solution of DSIF at crack tips is obtained. The method of crack-division is used to make radial cracks at the edge of cavity.
  采用裂纹切割技术构造出孔边径向裂纹，利用哈尔滨工程大学博士学位论文Green函数建立直接求解m型裂纹尖端动应力强度因子的定解积分方程组。
• Based on the problems,software of information fusion based on D-S evidence theory(DSIF) is designed and developed in the paper.
  针对这些问题,本文设计、开发了基于D-S证据理论的信息融合计算分析软件(DSIF)。
• Last when the medium parameters are altered, the influence on the crack DSIF is discussed partially with the displacement between circle canyon and crack.
  最后讨论了当介质参数不同时 ,随着圆孔与裂纹的距离变化对裂纹尖端动应力因子的影响
返回 DSIF