limit load

基本解释

The limit load of a defective cylinder is a very important input in a structural integrity assessment of a pressure vessel or pipe using R6 type procedure.
在使用R6方法的压力容器和管道结构完整性评估过程中，含缺陷圆筒的极限载荷是一个非常重要的输入参量。
Analysis and comparison between the finite element analysis and experiment results for stress intensity factor, limit load, and flexibility factor were performed.
从应力系数、极限载荷和柔度系数三个方面对有限元计算结果和试验结果进行对比分析。
The final test occurred Apr. 21 when the wing and trailing edges were subjected to their limit load of around 2.5g, the highest loads expected to be seen in service.
根据4月21最终试验的结果，机翼和后缘的承受的极限负荷为2.5g左右，而实际最高负荷只能在实际服役的时候才能知道。
www.etiri.com.cn

To pass muster with the Federal Aviation Administration and other certification bodies, wings have to sustain at least 150% of the load limit without rupturing.
ECONOMIST: Business travel
Because of the 20-mile limit, most of the Mexican trucks checked are short-hop rigs that pick up a load on the Mexican side and bring it across for an American rig to take onwards.
ECONOMIST: NAFTA

极限荷载
极限承载力
极限载荷
Systematic nonlinear analysis is carried out on fuel gas pipelines with corrosion defects by means of elastic-plastic finite element analysis method,effects of corrosion length,corrosion depth and corrosion width on limit load are also analyzed.
利用有限元弹塑性分析方法,对含腐蚀缺陷的燃气管道进行了非线性分析,研究了腐蚀缺陷的长度、宽度和深度对燃气管道极限载荷的影响。
界限荷载

极限载荷
Loading status of tubing in oilfields was mastered by doing lots of tubing load tests and analyses. And then the theoretical model about the limit load and the vibration of tubing has been constructed.
通过大量的油管载荷测试分析,掌握了油管工作载荷情况,在此基础上,建立油管工作时极限载荷与振动情况的理论模型。
极限荷载
Perturbation theory is used to get approximate solution. Plastic limit load of viscoplastic thick-walled cylinder and spherical shell subjected to internal pressure is investigated using the strain gradient plasticity theory.
基于应变梯度塑性理论,求得了内压作用下厚壁圆筒和球壳的极限荷载的分析解,经典塑性解是当前解的特例。
物理学
极限载荷
极限荷载
极限负荷
极限负载